Currently Unavailable, new models coming!

I’m excited to offer a J1772 extension!

The ICE Breaker is a extension cable that maintains the safety features and functions of the J1772 protocol. Specifically the proximity safety interlock works end to end on both the extension’s plug and the EVSE it is used with. This is accomplished with a extra conductor which is easy for me as I hand build all the assemblies. Doing this prevents dangerous HOT disconnects.

The ICE Breaker is a great accessory to have in your trunk. We have all seen the blocked EV charging stations. ICE Breaker gives you the reach you need when you get ICE’d.

Constructed with the same new 63A J1772 plugs I use for my BSA Custom Whips found on my custom built EVSE’s and a matching 63A J1772 socket with hinged door. The finished cable is a very flexible and light weight multi-conductor cable covered with BSA black & blue Heavy Wall braided sleeving.

Using multiple conductors gives great flexibility and the keeps size down. You will notice how light the cable is as well compared to other J1772 cables. The the double insulated wires are then covered in high temp PET Braided Sleeving. With the following features:

• high tensile strength
• cut & abrasion resistant
• halogen free
• resists gasoline, chemicals & cleaning solvents
• FAR 23/25, FMVSS 302 approved
• -103°F to 257°F (-75°C to 125°C) temperature range
• melt temperature 446°F (230°C)

The wires are jacketed (double insulated) for abrasion and wear resistance then the Heavy Wall braided sleeving adds another layer of protection.

Why use 63A plugs and sockets? The cost isn’t much less for the lower amperage versions, It only makes sense to buy all 63A parts, this way everyone gets a heaver duty unit.

I offer a 2 Year Parts and Labor Warranty on all my extensions and adapters

These extensions have a continuous rating of 80% of their full rating. Although the NEC code applies to home wiring not plug in devices like this it’s a good reference place to start and use their 80% rule.

Available in 32/40A, 40/52A, 50/65A versions 20 feet to 50 feet long.  

Continuous rating/Full rating;

32/40A for use on EV's with a 7.2kW on-board charger or smaller

40/52A for use on EV's with a 9.6kW on-board charger or smaller

50/65A for use on EV's with a 12kW on-board charger or smaller

I get a lot of inquires about custom builds. YES I definitely take orders for anything you would like to see in your Adapters, Extensions and EVSE’s. Click Contact from the main page and send me a email.