Menu
Cart 0

Power Tunnel™ 240 volt through wall extension

  • 14339


New product!

With the BSA Electronics Power Tunnel™ you can permanently install an extension in your wall to pass 240v power from your laundry room where your Dryer Outlet is located, to your garage where your Electric Vehicle is located.

Designed to extend your NEMA 10-30 (3-prong 240v 30amp, Dryer outlet found in homes built in before 1996) or NEMA 14-30 (4-prong 240v 30amp, Dryer outlet found in homes built in 1996+)

This is a kit that requires home electrical installations skills or installation by a licensed electrician. It includes the following;

PT #1 kit:

  • 1pc. L14-30 (locking 240v 30amp) power inlet mounted in stainless steel cover plate (to be mounted near existing Dryer Outlet)
  • 1pc. 10-30 power outlet with stainless steel cover plate (to be mounted near your Electric Vehicle)
  • 1pc. 5' Power cable with 10-30 male plug to L14-30 female outlet
  • 2pc. double gang blue retro fit boxes
  • 1pc. 3-foot length of 4 conductor, 10 gauge 30amp cable

 

PT #2 kit:

  • 1pc. L14-30 (locking 240v 30amp) power inlet mounted in stainless steel cover plate (to be mounted near existing Dryer Outlet)
  • 1pc. 14-30 power outlet with stainless steel cover plate (to be mounted near your Electric Vehicle)
  • 1pc. 5' Power cable with 14-30 male plug to L14-30 female outlet
  • 2pc. double gang blue retro fit boxes
  • 1pc. 3-foot length of 4 conductor, 10 gauge 30amp cable

 

PT #3 kit:

  • 1pc. L6-30 (locking 240v 30amp) power inlet mounted in stainless steel cover plate (to be mounted near existing Dryer Outlet)
  • 1pc. 10-30 power outlet with stainless steel cover plate (to be mounted near your Electric Vehicle)
  • 1pc. 5' Power cable with 10-30 male plug to L14-30 female outlet
  • 2pc. double gang blue retro fit boxes
  • 1pc. 3-foot length of 4 conductor, 10 gauge 30amp cable

 

The following kit is inspired by Dryer Buddy #4 and uses similar connectors;

PT #4 kit:

  • 1pc. L14-30 (locking 240v 30amp) power inlet mounted in stainless steel cover plate (to be mounted near existing Dryer Outlet)
  • 1pc. 14-50 power outlet with stainless steel cover plate (max draw 24amps) (to be mounted near your Electric Vehicle)
  • 1pc. 5.5' Power cable with 10-30 male plug to L14-30 female outlet
  • 2pc. double gang blue retro fit boxes
  • 1pc. 3-foot length of 4 conductor, 10 gauge 30amp cable

 

PT #5 kit:

  • 1pc. L14-30 (locking 240v 30amp) power inlet mounted in stainless steel cover plate (to be mounted near existing Dryer Outlet)
  • 1pc. 14-50 power outlet with stainless steel cover plate (max draw 24amps) (to be mounted near your Electric Vehicle)
  • 1pc. 5' Power cable with 14-30 male plug to L14-30 female outlet
  • 2pc. double gang blue retro fit boxes
  • 1pc. 3-foot length of 4 conductor, 10 gauge 30amp cable

    PT #6 kit:

    • 1pc. L14-30 (locking 240v 30amp) power inlet mounted in stainless steel cover plate (to be mounted near existing Dryer Outlet)
    • 1pc. L6-30 power outlet with stainless steel cover plate (to be mounted near your Electric Vehicle)
    • 1pc. 5' Power cable with 14-30 male plug to L14-30 female outlet
    • 1pc. double gang blue retro fit box
    • 1pc. single gang blue retro fit box
    • 1pc. 3-foot length of 4 conductor, 10 gauge 30amp cable

     

    PT #9 kit:

    • 1pc. L14-30 (locking 240v 30amp) power inlet mounted in stainless steel cover plate (to be mounted near existing Dryer Outlet)
    • 1pc. 6-50 power outlet with stainless steel cover plate (to be mounted near your Electric Vehicle)
    • 1pc. 5' Power cable with 10-30 male plug to L14-30 female outlet
    • 2pc. double gang blue retro fit boxes
    • 1pc. 3-foot length of 4 conductor, 10 gauge 30amp cable

     

    PT #10 kit:

    • 1pc. L14-30 (locking 240v 30amp) power inlet mounted in stainless steel cover plate (to be mounted near existing Dryer Outlet)
    • 1pc. 6-50 power outlet with stainless steel cover plate (to be mounted near your Electric Vehicle)
    • 1pc. 5' Power cable with 14-30 male plug to L14-30 female outlet
    • 2pc. double gang blue retro fit boxes
    • 1pc. 3-foot length of 4 conductor, 10 gauge 30amp cable

     

    PT #26 kit:

    • 1pc. L14-30 (locking 240v 30amp) power inlet mounted in stainless steel cover plate (to be mounted near existing Dryer Outlet)
    • 1pc. L14-30 power outlet with stainless steel cover plate (to be mounted near your Electric Vehicle)
    • 1pc. 5' Power cable with 10-30 male plug to L14-30 female outlet
    • 1pc. double gang blue retro fit box
    • 1pc. single gang blue retro fit box
    • 1pc. 3-foot length of 4 conductor, 10 gauge 30amp cable

     

    PT #27 kit:

    • 1pc. L14-30 (locking 240v 30amp) power inlet mounted in stainless steel cover plate (to be mounted near existing Dryer Outlet)
    • 1pc. L14-30 power outlet with stainless steel cover plate (to be mounted near your Electric Vehicle)
    • 1pc. 5' Power cable with 14-30 male plug to L14-30 female outlet
    • 1pc. double gang blue retro fit box
    • 1pc. single gang blue retro fit box
    • 1pc. 3-foot length of 4 conductor, 10 gauge 30amp cable

     

    The power input cord may be made shorter upon request. I offer many additional plugs and outlets, please place request in the order notes or email us.

    Due to the weight of 4 conductor 10 gauge 30amp cable, if you need a longer length it is recommended to purchase it from your local home improvement store.


    We Also Recommend