Cart 0

Adapter #127 30A 240v 3ft. cable NEMA L6-30 to two duplex outlets, accepts 6-15 and 6-20 plugs

  • 15969

This adapter allows you to plug into your 3-prong NEMA L6-30 Twist-Lock Outlet and gives you two 20 amp 240 volt Duplex Outlets, they will accept both NEMA 6-15 and 6-20 plugs.  This adapter is internally wired with 10 gauge 30amp wire, giving each duplex Outlet access to the total budget of 30amps from the power input cord. You draw up to 20 amps out of each duplex Outlet, but not all four at the same time as this would exceed the 30amp total limit. This means you can draw 20 amps out of one Outlet of the duplex and then a total of 10 amps amongst the remaining three outlets or 7.5 amps out of each of the four outlets, or any combination that adds up to 30 amps. Between the four outlets you have access to all 7200 watts from the power input cord.

Following the NEC codes 80% rule of thumb it states any continuous load should not be more than 80% of the rated capacity for maximum capacity. The NEC code's definition of a continuous load is one that runs for more than 3 hours so this would generally not include window Air Conditioners, Refrigerators, Freezers, Air Compressors, Welders and Dryers for example. If you are using equipment such as Electric Vehicle Charging Stations (EVSE), lights or any loads that can run for more than 3 hours then those are deemed continuous loads and you will need to limit your total load on each Outlet to 16 amps or 3840 watts continuous. With four Outlets this gives you access to a total of 24amps or 5760 watts continuous.

This adapter is built for a long life with the outlets house in a 4"x4" metal box. Visually it has white outlets and a flat metal cover but uses the same base box as Adapter #123

We Also Recommend